OSFP-DR4-400G-SiOSFP

$1,498.00

The OSFP 400GBASE-DR4 silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components. It is a cost-effective and lower power consumption solution for 400GBASE data center. The 400GBASE-DR4 silicon photonics module supports link lengths of up to 500m SMF with MTP/MPO-12 connector. It is compliant with OSFP MSA, CMIS 4.0 I2C Interface and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel 1310nm optical lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G.

The OSFP 400GBASE-DR4 silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components. It is a cost-effective and lower power consumption solution for 400GBASE data center. The 400GBASE-DR4 silicon photonics module supports link lengths of up to 500m SMF with MTP/MPO-12 connector. It is compliant with OSFP MSA, CMIS 4.0 I2C Interface and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel 1310nm optical lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G.

Generic Compatible 400G DR4 OSFP PAM4 1310nm 500m DOM MTP/MPO-12 Silicon Photonics Transceiver Module (SMF, 1310nm, 500m, MTP/MPO-12, DOM)

Product Highlights

Built-in Broadcom 7nm DSP Chip, Max. Power Consumption 10W
SiPh-Based Technology for Lower Power, Cost and Higher Density
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with OSFP MSA, CMIS 4.0
Support 4x100G Breakout to QSFP28-DR-100G
Hot-pluggable OSFP Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface

KeyValueKeyValue
Part NumberOSFP-DR4-400G-SiVendor NameFS
Form FactorOSFPMax Data Rate425Gbps (4x106.25Gb/s)
Wavelength1310nmMax Cable Distance500m
ConnectorMTP/MPO-12 (APC)MediaSMF
Transmitter TypeDFBReceiver TypePIN
TX Power-2.9~4.0dBmReceiver Sensitivity<-5.9dBm
Powerbudget3dBReceiver Overload5dBm
Power Consumption≤10WExtinction Ratio>3.5dB
DDM/DOMSupportedCommercial Temperature Range0 to 70°C (32 to 158°F)
CDR (Clock and Data Recovery)TX and RXInbuilt FECNo
ProtocolsIEEE 802.3bs - OSFP MSA - CMIS 4.0Warranty5 Years