OSFP-SR8-400GOSFP
$1,362.00
The 400GBASE-SR8 OSFP tansceiver supports up to 100m link lengths over multimode fiber (MMF) with MTP/MPO-16 connector. The 400 Gigabit Ethernet signal is carried over eight wavelengths. This transceiver is compliant with OSFP MSA, IEEE 802.3cd protocol and 400GAUI-8 standards, and is suitable for 400G Ethernet, Data Center and Cloud Networks.
Quantity:
Generic Compatible 400GBASE-SR8 OSFP PAM4 850nm 100m DOM Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)
Product Highlights
Built-in Inphi DSP Chip, Max. Power Consumption 11W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with OSFP MSA CMIS Rev4.1, OIF 56G PAM4
Hot-pluggable OSFP form Factor
High-speed Electrical Compliant to IEEE 802.3cd
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
Class 1 Laser Safety
| Key | Value | Key | Value |
|---|---|---|---|
| Part Number | OSFP-SR8-400G | Vendor Name | FS |
| Form Factor | OSFP | Max Data Rate | 425Gbps |
| Wavelength | 850nm | Max Cable Distance | 100m |
| Connector | MTP/MPO-16 (APC) | Media | MMF |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| TX Power | -6.5~4dBm | Receiver Sensitivity | <-8.4dBm |
| Powerbudget | 1.9dB | Receiver Overload | 4dBm |
| Power Consumption | ≤11W | Extinction Ratio | 3dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| CDR (Clock and Data Recovery) | TX and RX | Inbuilt FEC | No |
| Protocols | IEEE 802.3cd - OSFP MSA - CMIS 4.1 | Warranty | 5 Years |