Q28-100G-BX30QSFP28
$2,589.00
The Cisco Compatible QSFP28 transceiver provides 100GBase-BX throughput up to 30km over single-mode fiber (SMF) using a wavelength of 1304.58nm-Tx/1309.14nm-Rx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complimenting wavelengths. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in 100G Ethernet applications.
Quantity:
Cisco Compatible 100GBASE-BX30 QSFP28 Optical Transceiver Module for Ethernet (SMF, 1304.58nm-Tx/1309.14nm-Rx, 30km, Simplex LC, DOM)
Product Highlights
Built-in Marvell Chip, Max. Power Consumption 4.5W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
FS BOX - Support Real-time Configuration
Hot Pluggable QSFP28 MSA Compliant
100Gbps Hermetic BOSA with 1304.58nm/1309.14nm EML and PIN Detector
Two Wire Serial Interface with Digital Diagnostic Monitoring
Maximum Link Length of 30km on SMF Fiber
Class 1 FDA Laser Safety
| Key | Value | Key | Value |
|---|---|---|---|
| Part Number | Q28-100G-BX30 | Vendor Name | FS |
| Form Factor | QSFP28 | Max Data Rate | 106.25Gbps |
| Wavelength | 1304.58nm-Tx/1309.14nm-Rx | Max Cable Distance | 30km |
| Connector | Simplex LC | Media | SMF |
| Transmitter Type | EML | Receiver Type | PIN |
| TX Power | 0-5.6dBm | Receiver Reflectance | < -26dB |
| Min Powerbudget | 14.7dB | Receiver Overload | 5.6dBm |
| Power Consumption | <4.5W | Extinction Ratio | ＞5dB |
| DDM/DOM | Supported | Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | 100G-ER1-30 - SFF-8636 Rev 2.10a - QSFP28 MSA | Warranty | 5 Years |