QDD-400G-FR4-SQSFP-DD
$1,362.00
The 400GBASE-FR4 module supports link lengths of up to 2km SMF with duplex LC connector. It is compliant to IEEE 802.3bs, 400GBASE-FR4 Spec of 100G Lambda MSA group, and 400GAUI-8/CEI-56G-VSR-PAM4 standards. The 400 Gigabit Ethernet signal is carried over four CWDM grid optical wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.
Quantity:
Cisco QDD-400G-FR4-S Compatible 400GBASE-FR4 QSFP-DD PAM4 1310nm 2km DOM Optical Transceiver Module (SMF, 1310nm, 2km, LC, DOM)
Product Highlights
Built-in Inphi 7nm DSP Chip, Max. Power Consumption 8W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with QSFP-DD MSA CMIS Rev4.1, OIF 56G PAM4 and 100G Lambda MSA
FS BOX V4.0 - Support Real-time Configuration
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
Key | Value | Key | Value |
---|---|---|---|
Part Number | QDD-400G-FR4-S | Vendor Name | FS |
Form Factor | QSFP-DD | Max Data Rate | 400Gbps |
Wavelength | 1271nm,1291nm,1311nm,1331nm | Max Cable Distance | 2km |
Connector | Duplex LC (UPC) | Media | SMF |
Transmitter Type | CWDM EML | Receiver Type | PIN |
TX Power | -3.3~3.5dBm | Receiver Sensitivity | <-7.3dBm |
Powerbudget | 4dB | Receiver Overload | 3.5dBm |
Power Consumption | ≤8W | Extinction Ratio | 3.5dB |
DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
DSP | TX and RX | Inbuilt FEC | No |
Protocols | IEEE 802.3bs - QSFP-DD MSA - CMIS 4.1 | Warranty | 5 Years |