QSFP-100G-DR-SQSFP28
The 100GBASE-DR Single Lambda QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 500m over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors. The transceiver includes a Broadcom chip to convert the 4x25G NRZ electrical signals to a 1x100G PAM-4 optical signal. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as Data Center, 100G Ethernet.
Cisco QSFP-100G-DR-S Compatible 100GBASE-DR Single Lambda QSFP28 PAM4 Optical Transceiver Module (Single Lambda, SMF, 1310nm, 500m, LC, DOM)
Product Highlights
| Key | Value | Key | Value |
|---|---|---|---|
| Part Number | QSFP-100G-DR-S | Vendor Name | FS |
| Form Factor | QSFP28 | Max Data Rate | 103.125Gbps (4x 25.78Gbps) |
| Wavelength | 1310nm | Max Cable Distance | 500m |
| Connector | Duplex LC | Media | SMF |
| Transmitter Type | EML | Receiver Type | PIN |
| TX Power | -2.9~4dBm | Minimum Receiver Power | -5.9dBm |
| Powerbudget | 3dB | Receiver Overload | 4dBm |
| Power Consumption | ≤4W | Extinction Ratio | 3.5dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR | Inbuilt FEC | Yes (KP4) |
| Protocols | IEEE 802.3cd 100GBASE-DR Specification compliant | Warranty | 5 Years |