QSFPDD-ER8-400GQSFP-DD
$9,540.00
The 400GBASE-ER8 module supports link lengths of up to 40km over a standard pair of G.652 single mode fiber (SMF) with duplex LC connectors. It is compliant to IEEE 802.3cn protocol and 400GAUI-8, QSFP-DD HW Rev 5.0 and QSFP-DD CMIS Rev 4.0 standard. The 400 Gigabit Ethernet signal is carried over eight wavelengths. Multiplexing and demultiplexing of the eight wavelengths are managed within the device.
Quantity:
Cisco Compatible 400GBASE-ER8 QSFP-DD PAM4 1310nm 40km DOM Optical Transceiver Module (SMF, 1310nm, 40km, LC, DOM)
Product Highlights
Built-in Inphi DSP Chip, Max. Power Consumption 14W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with QSFP-DD MSA CMIS Rev4.0, OIF 56G PAM4
FS BOX V4.0 - Support Real-time Configuration
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3cn
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
| Key | Value | Key | Value |
|---|---|---|---|
| Part Number | QSFPDD-ER8-400G | Vendor Name | FS |
| Form Factor | QSFP-DD | Max Data Rate | 425Gbps |
| Wavelength | 1310nm | Max Cable Distance | 40km |
| Connector | Duplex LC (UPC) | Media | SMF |
| Transmitter Type | LWDM EML | Receiver Type | APD |
| TX Power | -0.6~5.6dBm | Receiver Sensitivity | <-16.1dBm(SECQ–17.5dBm) |
| Powerbudget | 15.5dB | Receiver Overload | -3.4dB |
| Power Consumption | ≤14W | Extinction Ratio | 6dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DSP | TX and RX | Inbuilt FEC | No |
| Protocols | IEEE 802.3cn - QSFP-DD MSA - CMIS 4.0 | Warranty | 5 Years |