QSFPDD-XDR4-400GQSFP-DD
$1,498.00
The 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-FR-100G.
Quantity:
Cisco Compatible 400GBASE-XDR4 QSFP-DD PAM4 1310nm 2km DOM Optical Transceiver Module (SMF, 1310nm, 2km, MTP/MPO, DOM)
Product Highlights
Built-in Inphi DSP Chip, Max. Power Consumption 10W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with QSFP-DD MSA CMIS Rev4.1, OIF 56G PAM4 and 100G Lambda MSA
Support 4x100G Breakout to QSFP28-FR-100G
Hot Pluggable QSFP-DD Form Factor
High-speed Electrical Compliant to IEEE 802.3bs
8x50G PAM4 Retimed 400GAUI-8 Electrical Interface
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
| Key | Value | Key | Value |
|---|---|---|---|
| Part Number | QSFPDD-XDR4-400G | Vendor Name | FS |
| Form Factor | QSFP-DD | Max Data Rate | 400Gbps |
| Wavelength | 1310nm | Max Cable Distance | 2km |
| Connector | MTP/MPO-12 (APC) | Media | SMF |
| Transmitter Type | 1310nm EML | Receiver Type | PIN |
| TX Power | -2.4~4.0dBm | Receiver Sensitivity | <-6.4dBm |
| Powerbudget | 4dB | Receiver Overload | 3.5dBm |
| Power Consumption | ≤10W | Extinction Ratio | 3.5dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DSP | TX and RX | Inbuilt FEC | No |
| Protocols | IEEE 802.3bs - QSFP-DD MSA - CMIS 4.1 | Warranty | 5 Years |